Update regcache-maple.c #1

namiltd · 2024-07-25T21:45:22Z

Initialize variables

…mode in i.MX 8QM Fix the issue where MEM_TO_MEM fail on i.MX8QM due to the requirement that both source and destination addresses need pass through the IOMMU. Typically, peripheral FIFO addresses bypass the IOMMU, necessitating only one of the source or destination to go through it. Set "is_remote" to true to ensure both source and destination addresses pass through the IOMMU. iMX8 Spec define "Local" and "Remote" bus as below. Local bus: bypass IOMMU to directly access other peripheral register, such as FIFO. Remote bus: go through IOMMU to access system memory. The test fail log as follow: [ 66.268506] dmatest: dma0chan0-copy0: result #1: 'test timed out' with src_off=0x100 dst_off=0x80 len=0x3ec0 (0) [ 66.278785] dmatest: dma0chan0-copy0: summary 1 tests, 1 failures 0.32 iops 4 KB/s (0) Fixes: 72f5801 ("dmaengine: fsl-edma: integrate v3 support") Signed-off-by: Joy Zou <[email protected]> Cc: [email protected] Reviewed-by: Frank Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>

Fix warning at drivers/pci/msi/msi.h:121. Recently, I added a PCI to PCIe bridge adaptor and a PCIe NVME card to my rp3440. Then, I noticed this warning at boot: WARNING: CPU: 0 PID: 10 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x68/0x90 CPU: 0 PID: 10 Comm: kworker/u32:0 Not tainted 6.9.7-parisc64 #1 Debian 6.9.7-1 Hardware name: 9000/800/rp3440 Workqueue: async async_run_entry_fn We need to select PCI_MSI_ARCH_FALLBACKS when PCI_MSI is selected. Signed-off-by: John David Anglin <[email protected]> Cc: [email protected] # v6.0+ Signed-off-by: Helge Deller <[email protected]>

The lifetime of TCP-AO static_key is the same as the last tcp_ao_info. On the socket destruction tcp_ao_info ceases to be with RCU grace period, while tcp-ao static branch is currently deferred destructed. The static key definition is : DEFINE_STATIC_KEY_DEFERRED_FALSE(tcp_ao_needed, HZ); which means that if RCU grace period is delayed by more than a second and tcp_ao_needed is in the process of disablement, other CPUs may yet see tcp_ao_info which atent dead, but soon-to-be. And that breaks the assumption of static_key_fast_inc_not_disabled(). Happened on netdev test-bot[1], so not a theoretical issue: [] jump_label: Fatal kernel bug, unexpected op at tcp_inbound_hash+0x1a7/0x870 [ffffffffa8c4e9b7] (eb 50 0f 1f 44 != 66 90 0f 1f 00)) size:2 type:1 [] ------------[ cut here ]------------ [] kernel BUG at arch/x86/kernel/jump_label.c:73! [] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [] CPU: 3 PID: 243 Comm: kworker/3:3 Not tainted 6.10.0-virtme #1 [] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [] Workqueue: events jump_label_update_timeout [] RIP: 0010:__jump_label_patch+0x2f6/0x350 ... [] Call Trace: [] <TASK> [] arch_jump_label_transform_queue+0x6c/0x110 [] __jump_label_update+0xef/0x350 [] __static_key_slow_dec_cpuslocked.part.0+0x3c/0x60 [] jump_label_update_timeout+0x2c/0x40 [] process_one_work+0xe3b/0x1670 [] worker_thread+0x587/0xce0 [] kthread+0x28a/0x350 [] ret_from_fork+0x31/0x70 [] ret_from_fork_asm+0x1a/0x30 [] </TASK> [] Modules linked in: veth [] ---[ end trace 0000000000000000 ]--- [] RIP: 0010:__jump_label_patch+0x2f6/0x350 [1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao-dbg/results/696681/5-connect-deny-ipv6/stderr Cc: [email protected] Fixes: 67fa83f ("net/tcp: Add static_key for TCP-AO") Signed-off-by: Dmitry Safonov <[email protected]> Signed-off-by: NipaLocal <nipa@local>

Removing a peer while userspace attempts to close its transport socket triggers a race condition resulting in the following crash: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000077: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000003b8-0x00000000000003bf] CPU: 12 UID: 0 PID: 162 Comm: kworker/12:1 Tainted: G O 6.15.0-rc2-00635-g521139ac3840 torvalds#272 PREEMPT(full) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-20240910_120124-localhost 04/01/2014 Workqueue: events ovpn_peer_keepalive_work [ovpn] RIP: 0010:ovpn_socket_release+0x23c/0x500 [ovpn] Code: ea 03 80 3c 02 00 0f 85 71 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d bc 24 be 03 00 00 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 30 RSP: 0018:ffffc90000c9fb18 EFLAGS: 00010217 RAX: dffffc0000000000 RBX: ffff8881148d7940 RCX: ffffffff817787bb RDX: 0000000000000077 RSI: 0000000000000008 RDI: 00000000000003be RBP: ffffc90000c9fb30 R08: 0000000000000000 R09: fffffbfff0d3e840 R10: ffffffff869f4207 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888115eb9300 R14: ffffc90000c9fbc8 R15: 000000000000000c FS: 0000000000000000(0000) GS:ffff8882b0151000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f37266b6114 CR3: 00000000054a8000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> unlock_ovpn+0x8b/0xe0 [ovpn] ovpn_peer_keepalive_work+0xe3/0x540 [ovpn] ? ovpn_peers_free+0x780/0x780 [ovpn] ? lock_acquire+0x56/0x70 ? process_one_work+0x888/0x1740 process_one_work+0x933/0x1740 ? pwq_dec_nr_in_flight+0x10b0/0x10b0 ? move_linked_works+0x12d/0x2c0 ? assign_work+0x163/0x270 worker_thread+0x4d6/0xd90 ? preempt_count_sub+0x4c/0x70 ? process_one_work+0x1740/0x1740 kthread+0x36c/0x710 ? trace_preempt_on+0x8c/0x1e0 ? kthread_is_per_cpu+0xc0/0xc0 ? preempt_count_sub+0x4c/0x70 ? _raw_spin_unlock_irq+0x36/0x60 ? calculate_sigpending+0x7b/0xa0 ? kthread_is_per_cpu+0xc0/0xc0 ret_from_fork+0x3a/0x80 ? kthread_is_per_cpu+0xc0/0xc0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: ovpn(O) This happens because the peer deletion operation reaches ovpn_socket_release() while ovpn_sock->sock (struct socket *) and its sk member (struct sock *) are still both valid. Here synchronize_rcu() is invoked, after which ovpn_sock->sock->sk becomes NULL, due to the concurrent socket closing triggered from userspace. After having invoked synchronize_rcu(), ovpn_socket_release() will attempt dereferencing ovpn_sock->sock->sk, triggering the crash reported above. The reason for accessing sk is that we need to retrieve its protocol and continue the cleanup routine accordingly. This crash can be easily produced by running openvpn userspace in client mode with `--keepalive 10 20`, while entirely omitting this option on the server side. After 20 seconds ovpn will assume the peer (server) to be dead, will start removing it and will notify userspace. The latter will receive the notification and close the transport socket, thus triggering the crash. To fix the race condition for good, we need to refactor struct ovpn_socket. Since ovpn is always only interested in the sock->sk member (struct sock *) we can directly hold a reference to it, raher than accessing it via its struct socket container. This means changing "struct socket *ovpn_socket->sock" to "struct sock *ovpn_socket->sk". While acquiring a reference to sk, we can increase its refcounter without affecting the socket close()/destroy() notification (which we rely on when userspace closes a socket we are using). By increasing sk's refcounter we know we can dereference it in ovpn_socket_release() without incurring in any race condition anymore. ovpn_socket_release() will ultimately decrease the reference counter. Cc: Oleksandr Natalenko <[email protected]> Fixes: 11851cb ("ovpn: implement TCP transport") Reported-by: Qingfang Deng <[email protected]> Closes: OpenVPN#1 Tested-by: Gert Doering <[email protected]> Link: https://www.mail-archive.com/[email protected]/msg31575.html Signed-off-by: Antonio Quartulli <[email protected]> Signed-off-by: NipaLocal <nipa@local>

When the XDP program is loaded, the XDP callback adds new Tx queues. This means that the callback must update the Tx scheduler with the new queue number. In the event of a Tx scheduler failure, the XDP callback should also fail and roll back any changes previously made for XDP preparation. The previous implementation had a bug that not all changes made by the XDP callback were rolled back. This caused the crash with the following call trace: [ +9.549584] ice 0000:ca:00.0: Failed VSI LAN queue config for XDP, error: -5 [ +0.382335] Oops: general protection fault, probably for non-canonical address 0x50a2250a90495525: 0000 [#1] SMP NOPTI [ +0.010710] CPU: 103 UID: 0 PID: 0 Comm: swapper/103 Not tainted 6.14.0-net-next-mar-31+ torvalds#14 PREEMPT(voluntary) [ +0.010175] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [ +0.010946] RIP: 0010:__ice_update_sample+0x39/0xe0 [ice] [...] [ +0.002715] Call Trace: [ +0.002452] <IRQ> [ +0.002021] ? __die_body.cold+0x19/0x29 [ +0.003922] ? die_addr+0x3c/0x60 [ +0.003319] ? exc_general_protection+0x17c/0x400 [ +0.004707] ? asm_exc_general_protection+0x26/0x30 [ +0.004879] ? __ice_update_sample+0x39/0xe0 [ice] [ +0.004835] ice_napi_poll+0x665/0x680 [ice] [ +0.004320] __napi_poll+0x28/0x190 [ +0.003500] net_rx_action+0x198/0x360 [ +0.003752] ? update_rq_clock+0x39/0x220 [ +0.004013] handle_softirqs+0xf1/0x340 [ +0.003840] ? sched_clock_cpu+0xf/0x1f0 [ +0.003925] __irq_exit_rcu+0xc2/0xe0 [ +0.003665] common_interrupt+0x85/0xa0 [ +0.003839] </IRQ> [ +0.002098] <TASK> [ +0.002106] asm_common_interrupt+0x26/0x40 [ +0.004184] RIP: 0010:cpuidle_enter_state+0xd3/0x690 Fix this by performing the missing unmapping of XDP queues from q_vectors and setting the XDP rings pointer back to NULL after all those queues are released. Also, add an immediate exit from the XDP callback in case of ring preparation failure. Fixes: efc2214 ("ice: Add support for XDP") Reviewed-by: Dawid Osuchowski <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Michal Kubiak <[email protected]> Reviewed-by: Aleksandr Loktionov <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Jesse Brandeburg <[email protected]> Tested-by: Saritha Sanigani <[email protected]> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: NipaLocal <nipa@local>

Commit a1e40ac ("net: gso: fix udp gso fraglist segmentation after pull from frag_list") detected invalid geometry in frag_list skbs and redirects them from skb_segment_list to more robust skb_segment. But some packets with modified geometry can also hit bugs in that code. We don't know how many such cases exist. Addressing each one by one also requires touching the complex skb_segment code, which risks introducing bugs for other types of skbs. Instead, linearize all these packets that fail the basic invariants on gso fraglist skbs. That is more robust. If only part of the fraglist payload is pulled into head_skb, it will always cause exception when splitting skbs by skb_segment. For detailed call stack information, see below. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify fraglist skbs, breaking these invariants. In extreme cases they pull one part of data into skb linear. For UDP, this causes three payloads with lengths of (11,11,10) bytes were pulled tail to become (12,10,10) bytes. The skbs no longer meets the above SKB_GSO_FRAGLIST conditions because payload was pulled into head_skb, it needs to be linearized before pass to regular skb_segment. skb_segment+0xcd0/0xd14 __udp_gso_segment+0x334/0x5f4 udp4_ufo_fragment+0x118/0x15c inet_gso_segment+0x164/0x338 skb_mac_gso_segment+0xc4/0x13c __skb_gso_segment+0xc4/0x124 validate_xmit_skb+0x9c/0x2c0 validate_xmit_skb_list+0x4c/0x80 sch_direct_xmit+0x70/0x404 __dev_queue_xmit+0x64c/0xe5c neigh_resolve_output+0x178/0x1c4 ip_finish_output2+0x37c/0x47c __ip_finish_output+0x194/0x240 ip_finish_output+0x20/0xf4 ip_output+0x100/0x1a0 NF_HOOK+0xc4/0x16c ip_forward+0x314/0x32c ip_rcv+0x90/0x118 __netif_receive_skb+0x74/0x124 process_backlog+0xe8/0x1a4 __napi_poll+0x5c/0x1f8 net_rx_action+0x154/0x314 handle_softirqs+0x154/0x4b8 [118.376811] [C201134] rxq0_pus: [name:bug&]kernel BUG at net/core/skbuff.c:4278! [118.376829] [C201134] rxq0_pus: [name:traps&]Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP [118.470774] [C201134] rxq0_pus: [name:mrdump&]Kernel Offset: 0x178cc00000 from 0xffffffc008000000 [118.470810] [C201134] rxq0_pus: [name:mrdump&]PHYS_OFFSET: 0x40000000 [118.470827] [C201134] rxq0_pus: [name:mrdump&]pstate: 60400005 (nZCv daif +PAN -UAO) [118.470848] [C201134] rxq0_pus: [name:mrdump&]pc : [0xffffffd79598aefc] skb_segment+0xcd0/0xd14 [118.470900] [C201134] rxq0_pus: [name:mrdump&]lr : [0xffffffd79598a5e8] skb_segment+0x3bc/0xd14 [118.470928] [C201134] rxq0_pus: [name:mrdump&]sp : ffffffc008013770 Fixes: a1e40ac ("gso: fix udp gso fraglist segmentation after pull from frag_list") Signed-off-by: Shiming Cheng <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: NipaLocal <nipa@local>

When driver handles the napi rx polling requests, the netdev might have been released by the dellink logic triggered by the disconnect operation on user plane. However, in the logic of processing skb in polling, an invalid netdev is still being used, which causes a panic. BUG: kernel NULL pointer dereference, address: 00000000000000f1 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:dev_gro_receive+0x3a/0x620 [...] Call Trace: <IRQ> ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x4f/0xa0 ? asm_exc_page_fault+0x22/0x30 ? __pfx_t7xx_ccmni_recv_skb+0x10/0x10 [mtk_t7xx (HASH:1400 7)] ? dev_gro_receive+0x3a/0x620 napi_gro_receive+0xad/0x170 t7xx_ccmni_recv_skb+0x48/0x70 [mtk_t7xx (HASH:1400 7)] t7xx_dpmaif_napi_rx_poll+0x590/0x800 [mtk_t7xx (HASH:1400 7)] net_rx_action+0x103/0x470 irq_exit_rcu+0x13a/0x310 sysvec_apic_timer_interrupt+0x56/0x90 </IRQ> Fixes: 5545b7b ("net: wwan: t7xx: Add NAPI support") Signed-off-by: Jinjian Song <[email protected]> Signed-off-by: NipaLocal <nipa@local>